The layer 2 switch must have all user-facing or untrusted ports configured as access switch ports.

From Layer 2 Switch Security Requirements Guide

Part of SRG-NET-000512

Associated with: CCI-000366

SV-76699r1_rule The layer 2 switch must have all user-facing or untrusted ports configured as access switch ports.

Vulnerability discussion

Double encapsulation can be initiated by an attacker who has access to a switch port belonging to the native VLAN of the trunk port. Knowing the victim's MAC address and with the victim attached to a different switch belonging to the same trunk group, thereby requiring the trunk link and frame tagging, the malicious user can begin the attack by sending frames with two sets of tags. The outer tag that will have the attacker's VLAN ID (probably the well-known and omnipresent default VLAN) is stripped off by the switch, and the inner tag that will have the victim's VLAN ID is used by the switch as the next hop and sent out the trunk port.

Check content

Review the switch configurations and examine all user-facing or untrusted switch ports. If any of the user-facing switch ports are configured as a trunk, this is a finding.

Fix text

Disable trunking on all user-facing or untrusted switch ports.

Pro Tips

Lavender hyperlinks in small type off to the right (of CSS class id, if you view the page source) point to globally unique URIs for each document and item. Copy the link location and paste anywhere you need to talk unambiguously about these things.

You can obtain data about documents and items in other formats. Simply provide an HTTP header Accept: text/turtle or Accept: application/rdf+xml.

Powered by sagemincer