Default routes must not be directed to the tunnel entry point.

From Infrastructure Router Security Technical Implementation Guide Juniper

Associated with IA controls: ECSC-1

SV-20504r2_rule Default routes must not be directed to the tunnel entry point.

Vulnerability discussion

Routing in the network containing the tunnel entry point must be configured to direct the intended traffic into the tunnel. Depending on the router products used this may be done by creating routes to a tunnel by name, by address, or by interface. If multiple tunnels are defined or IPv6 interfaces, you must be selective with static routes, policy based routing, or even let the interior gateway protocol (IGP) make the decision since a ipv4 or ipv6 address has been configured on the tunnel. The key is the administrator should carefully plan and configure or let the IGP determine what goes into each tunnel.

Check content

Identify the tunnel endpoints, then review all routing devices to ensure the tunnel entry point is not used as a default route. Traffic destined to the tunnel should be directed to the tunnel endpoint by static routes, policy based routing, or by the mechanics of the interior routing protocol, but not by default route statements.

Fix text

The SA must carefully plan and configure or let IGP determine what goes into each tunnel.

Pro Tips

Lavender hyperlinks in small type off to the right (of CSS class id, if you view the page source) point to globally unique URIs for each document and item. Copy the link location and paste anywhere you need to talk unambiguously about these things.

You can obtain data about documents and items in other formats. Simply provide an HTTP header Accept: text/turtle or Accept: application/rdf+xml.