The PE router must be configured to have each VRF with the appropriate Route Distinguisher (RD).

Associated with: CCI-000366

SV-93003r1_rule The PE router must be configured to have each VRF with the appropriate Route Distinguisher (RD).

Vulnerability discussion

An RD provides uniqueness to the customer address spaces within the MPLS L3VPN infrastructure. The concept of the VPN-IPv4 and VPN-IPv6 address families consists of the RD prepended before the IP address. Hence, if the same IP prefix is used in several different L3VPNs, it is possible for BGP to carry several completely different routes for that prefix, one for each VPN.Since VPN-IPv4 addresses and IPv4 addresses are different address families, BGP never treats them as comparable addresses. The purpose of the RD is to create distinct routes for common IPv4 address prefixes. On any given PE router, a single RD can define a VRF in which the entire address space may be used independently, regardless of the makeup of other VPN address spaces. Hence, it is imperative that a unique RD is assigned to each L3VPN and that the proper RD is configured for each VRF.

Check content

Review the RDs that have been assigned for each VRF according to the plan provided by the ISSM. Review all VRFs configured on CE-facing interfaces and verify that the proper RD has been configured for each. If the wrong RD has been configured for any VRF, this is a finding.

Fix text

Configure the correct RD for each VRF.

Pro Tips

Lavender hyperlinks in small type off to the right (of CSS class id, if you view the page source) point to globally unique URIs for each document and item. Copy the link location and paste anywhere you need to talk unambiguously about these things.

You can obtain data about documents and items in other formats. Simply provide an HTTP header Accept: text/turtle or Accept: application/rdf+xml.