The network element must only allow management connections for administrative access from hosts residing in to the management network.

From Infrastructure Router Security Technical Implementation Guide Juniper

Part of Management connections are not restricted.

SV-15450r3_rule The network element must only allow management connections for administrative access from hosts residing in to the management network.

Vulnerability discussion

Remote administration is inherently dangerous because anyone with a sniffer and access to the right LAN segment, could acquire the device account and password information. With this intercepted information they could gain access to the infrastructure and cause denial of service attacks, intercept sensitive information, or perform other destructive actions.

Check content

Review the router configuration and verify that only authorized internal connections are allowed access to the routing engine via ssh. Access to the Juniper routing engine is via loopback interface. The configuration should look similar to the following: [edit interfaces] lo0 { unit 0 { family inet { filter { input protect-routing-engine; } address 192.168.1.2/32; } } } [edit firewall] family inet { filter protect-routing-engine { term terminal-access { from { source-address { 192.168.1.10; 192.168.1.11; } protocol tcp; port ssh; } then { syslog; accept; } } term default-action { then { log; discard; } } } }

Fix text

Configure an ACL or filter to restrict management access to the device from only the management network.

Pro Tips

Lavender hyperlinks in small type off to the right (of CSS class id, if you view the page source) point to globally unique URIs for each document and item. Copy the link location and paste anywhere you need to talk unambiguously about these things.

You can obtain data about documents and items in other formats. Simply provide an HTTP header Accept: text/turtle or Accept: application/rdf+xml.

Powered by sagemincer