From Firewall Security Technical Implementation Guide - Cisco
Part of The management interface is not IGP passive.
The OOBM access switch will connect to the management interface of the managed network elements. The management interface can be a true OOBM interface or a standard interface functioning as the management interface. In either case, the management interface of the managed network element will be directly connected to the OOBM network.
If the managed network element is a Cisco PIX or ASA firewall with an IGP enabled, review the configuration to verify the management interface is configured as passive for the IGP instance for the managed network. In the example below, OSPF is only enabled on the interface connecting to the internal network. interface Ethernet0/2 nameif Management security-level 90 ip address 10.1.1.23 255.255.255.0 management-only interface GigabitEthernet0 nameif outside security-level 0 ip address 172.20.2.1 255.255.255.0 interface GigabitEthernet1 nameif inside security-level 100 ip address 192.168.1.0 255.255.255.0 ! router ospf 1 network 192.168.1.0 255.255.255.0 area 1
Configure the management interface as passive for the IGP instance configured for the managed network. Depending on the platform and routing protocol, this may simply require that the interface or its IP address is not included in the IGP configuration.
Lavender hyperlinks in small type off to the right (of CSS
class id
, if you view the page source) point to
globally unique URIs for each document and item. Copy the
link location and paste anywhere you need to talk
unambiguously about these things.
You can obtain data about documents and items in other
formats. Simply provide an HTTP header Accept:
text/turtle
or
Accept: application/rdf+xml
.
Powered by sagemincer