The Juniper SRX Services Gateway must be configured to use a centralized authentication server to authenticate privileged users for remote and nonlocal access for device management.

From Juniper SRX SG NDM Security Technical Implementation Guide

Part of SRG-APP-000516-NDM-000338

Associated with: CCI-000366 CCI-000372

SV-80939r1_rule The Juniper SRX Services Gateway must be configured to use a centralized authentication server to authenticate privileged users for remote and nonlocal access for device management.

Vulnerability discussion

Centralized management of authentication settings increases the security of remote and nonlocal access methods. This control is a particularly important protection against the insider threat. Audit records for administrator accounts access to the organization's network devices can be more readily analyzed for trends and anomalies. The alternative method of defining administrator accounts on each device exposes the device configuration to remote access authentication attacks and system administrators with multiple authenticators for each network device.The Juniper SRX supports three methods of user authentication: local password authentication, Remote Authentication Dial-In User Service (RADIUS), and Terminal Access Controller Access Control System Plus (TACACS+). RADIUS and TACACS+ are remote access methods used for management of the Juniper SRX. The local password method will be configured for use only for the account of last resort; however, it will not be used for remote and nonlocal access or this will result in a CAT 1 finding (CCI-000765).This requirement references identification and authentication and does not prevent the configuration of privileges using the remote template account (CCI-000213).

Check content

Verify the Juniper SRX is configured to forward logon requests to a RADIUS or TACACS+. From the CLI operational mode enter: show system radius-server or show system tacplus-server If the Juniper SRX is not configured to use at least one RADIUS or TACACS+ server, this is a finding.

Fix text

Configure the Juniper SRX to forward logon requests to a RADIUS or TACACS+. Remove local users configured on the device (CCI-000213) so the AAA server cannot default to using a local account. [edit] set system tacplus-server address port 1812 secret or [edit] set system radius-server address port 1812 secret Note: DoD policy is that redundant AAA servers are required to mitigate the risk of a failure of the primary AAA device.

Pro Tips

Lavender hyperlinks in small type off to the right (of CSS class id, if you view the page source) point to globally unique URIs for each document and item. Copy the link location and paste anywhere you need to talk unambiguously about these things.

You can obtain data about documents and items in other formats. Simply provide an HTTP header Accept: text/turtle or Accept: application/rdf+xml.

Powered by sagemincer