From Perimeter L3 Switch Security Technical Implementation Guide - Cisco
Part of Tunneled IPv4 in IPv6 traffic in NAT-PT
Network Address Translation with Protocol Translation (NAT-PT), defined in [RFC2766], is a service that can be used to translate data sent between IP-heterogeneous nodes. NAT-PT translates a IPv4 datagram into a semantically equivalent IPv6 datagram or vice versa. For this service to work it has to be located in the connection point between the IPv4 network and the IPv6 network. The PT-part of the NAT-PT handles the interpretation and translation of the semantically equivalent IP header, either from IPv4 to IPv6 or from IPv6 to IPv4. Like NAT, NATPT also uses a pool of addresses which it dynamically assigns to the translated datagrams.
Base Procedure:Review network diagram in the STIG and ensure the architecture is designed correctly. The interface adjacent to the IPv4 LAN interface must not deploy IPv6 over IPv4. The techniques include using manually configured tunnels, generic routing encapsulation (GRE) tunnels, semiautomatic tunnel mechanisms such as tunnel broker services, and fully automatic tunnel mechanisms such as 6to4 for the WAN and intra-site automatic tunnel addressing protocol (ISATAP).
If NAT/PT is required the tunnel needs to be removed.
Lavender hyperlinks in small type off to the right (of CSS
class id
, if you view the page source) point to
globally unique URIs for each document and item. Copy the
link location and paste anywhere you need to talk
unambiguously about these things.
You can obtain data about documents and items in other
formats. Simply provide an HTTP header Accept:
text/turtle
or
Accept: application/rdf+xml
.
Powered by sagemincer