An IP-based VTC system implementing a single CODEC supporting conferences on multiple networks having different classification levels (i.e., unclassified, SECRET, TOP SECRET, TS-SCI) must support Periods Processing by connecting the CODEC to one network at a time, matching the classification level of the session to the classification level of the network.

From Video Services Policy STIG

Part of RTS-VTC 7020 [IP]

Associated with IA controls: EBCR-1, ECIC-1

SV-55745r1_rule An IP-based VTC system implementing a single CODEC supporting conferences on multiple networks having different classification levels (i.e., unclassified, SECRET, TOP SECRET, TS-SCI) must support Periods Processing by connecting the CODEC to one network at a time, matching the classification level of the session to the classification level of the network.

Vulnerability discussion

Connecting to networks of different classifications simultaneously incurs the risk of data from a higher classification being released to a network of a lower classification, referred to as a “spill”. It is imperative that networks of differing classification levels or with differing handling caveats not be interconnected at any time. Separation in a multinetwork VTC system is maintained by the use of an A/B, A/B/C, or A/B/C/D switch that meets requirements for channel isolation, or by manual connection of the CODEC to one network at a time.

Check content

Review the VTC system architecture to verify that an approved A/B, A/B/C, or A/B/C/D switch is present and properly cabled. Alternately, validate that the VTC CODEC is manually connected to one network at a time through the use of a single patch cord. If neither is in place, this is a finding.

Fix text

Obtain and install an approved A/B, A/B/C, or A/B/C/D switch. Alternately, manually connect the VTC CODEC to one network at a time through the use of a single patch cord.

Pro Tips

Powered by sagemincer