JES2 spool resources will be controlled in accordance with security requirements.

From z/OS ACF2 STIG

Part of ZJES0046

Associated with IA controls: DCCS-1, ECCD-2, DCCS-2, ECCD-1

Associated with: CCI-000213 CCI-002234

SV-7227r3_rule JES2 spool resources will be controlled in accordance with security requirements.

Vulnerability discussion

JES2 spool resources include all SYSOUT, SYSLOG, JESTRACE, and JESNEWS data sets. Failure to properly control JES2 spool resources could result in unauthorized personnel accessing job output, system activity logs, and trace data containing userid and password information. This exposure may threaten the integrity and availability of the operating system environment, and compromise the confidentiality of customer data.

Check content

Refer to the following reports produced by the ACF2 Data Collection and Data Set and Resource Data Collection: - SENSITVE.RPT(JESSPOOL) - ACF2CMDS.RPT(RESOURCE) – Alternate report - ACF2CMDS.RPT(ACFGSO) Verify that the accesses to the JESSPOOL resources are properly restricted. If the following guidance is true, this is not a finding. Review the ACFGSO report, a CLASMAP will define JESSPOOL as TYPE(SPL). NOTE: If CLASMAP defines JESSPOOL as anything other than TYPE(SPL), replace SPL below with the appropriate three letters. Review the JESSPOOL report for resource rules with the following naming convention. These rules may be fully qualified, be specified as generic, or be specified with masking as indicated below: localnodeid.logonid.jobname.jobid.dsnumber.name localnodeid The name of the node on which the SYSIN or SYSOUT data set currently resides. Logonids The logonid associated with the job. This is the logonid ACF2 uses for validation purposes when the job runs. jobname The name that appears in the name field of the JOB statement. jobid The job number JES2 assigned to the job. dsnumber The unique data set number JES2 assigned to the spool data set. A D is the first character of this qualifier. name The name of the data set specified in the DSN= parameter of the DD statement. If the JCL did not specify DSN= on the DD statement that creates the spool data set, JES2 uses a question mark (?). All users have access to their own JESSPOOL resources. The localnodeid. resource will be restricted to only system programmers, operators, and automated operations personnel, with access to allow all SERVICEs or any combination of SERVICE(…). All access will be logged. (localnodeid. resource includes all generic and/or masked permissions, example: localnodeid.-.-, localnodeid.-, etc) The JESSPOOL localnodeid.userid.jobname.jobid.dsnumber.name, whether generic and/or masked, can be made available to users, when approved by the IAO. Access will be identified at the minimum access for the user to accomplish the users function, SERVICE(READ, UPDATE, DELETE, ADD). All access will be logged. An example is team members within a team, providing the capability to view, help, and/or debug other team member jobs/processes. CSSMTP will be restricted to localnodeid.userid.jobname.jobid.dsnumber.name, whether generic and/or masked when approved by the IAO. All access will be logged. Spooling products users (CA-SPOOL, CA View, etc.) will be restricted to localnodeid.userid.jobname.jobid.dsnumber.name, whether generic and/or masked when approved by the IAO. Logging of access is not required.

Fix text

The IAO will develop a plan of action to implement the required changes. Ensure the following items are in effect for JESSPOOL resources. The JESSPOOL may have more restrictive security at the direction of the IAO. The JESSPOOL resources may be fully qualified, be specified as generic, or be specified with masking as indicated below: localnodeid.userid.jobname.jobid.dsnumber.name localnodeid The name of the node on which the SYSIN or SYSOUT data set currently resides. userid The userid associated with the job. This is the userid used for validation purposes when the job runs. jobname The name that appears in the name field of the JOB statement. jobid The job number JES2 assigned to the job. dsnumber The unique data set number JES2 assigned to the spool data set. A D is the first character of this qualifier. name The name of the data set specified in the DSN= parameter of the DD statement. If the JCL did not specify DSN= on the DD statement that creates the spool data set, JES2 uses a question mark (?). The CLASMAP defines JESSPOOL as TYPE(SPL). Example: SHOW CLASMAP By default a user has access only to that user’s own JESSPOOL resources. However, situations exist where a user legitimately requires access to jobs that run under another user’s userid. In particular, if a user routes SYSOUT to an external writer, the external writer should have access to that user’s SYSOUT. The localnodeid. resource will be restricted to only system programmers, operators, and automated operations personnel with access to allow all SERVICEs or any combination of SERVICE(READ, UPDATE, DELETE, ADD). All access will be logged. (localnodeid. resource includes all generic and/or masked permissions, example: localnodeid.-.-, localnodeid.-, etc) Example: SET R(SPL) $KEY(localnode) TYPE(SPL) - UID(syspaudt) SERVICE(UPDATE,READ) LOG - UID(*) PREVENT The JESSPOOL localnodeid.userid.jobname.jobid.dsnumber.name, whether generic and/or masked, can be made available to users, when approved by the IAO. Access will be identified at the minimum access for the user to accomplish the users function, SERVICE(READ, UPDATE, DELETE, ADD). All access will be logged. An example is team members within a team, providing the capability to view, help, and/or debug other team member jobs/processes. If frequent situations occur where users working on a common project require selective access to each other's jobs, then the installation may delegate to the individual users the authority to grant access, but only with the approval of the IAO. Example: SET R(SPL) $KEY(localnode) TYPE(SPL) UMO- UID(UML03IGUSRZSS***UMO) SERVICE(UPDATE,READ) LOG - UID(*) PREVENT If IBM’s SDSF product is installed on the system, resources defined to the JESSPOOL resource class control functions related to jobs, output groups, and SYSIN/SYSOUT data sets on various SDSF panels. CSSMTP will not be granted to the JESSPOOL resource of the high level “node.” or “localnodeid.” . CSSMTP can have access to the specific approved JESSPOOL resources, minimally qualified to the node.userid. and all access will be logged. This will ensure system records who (userid) sent traffic to CSSMTP, when and what job/process. Spooling products users (CA-SPOOL, CA View, etc.) will be restricted to localnodeid.userid.jobname.jobid.dsnumber.name, whether generic and/or masked when approved by the IAO. Logging of access is not required. The IAO will review JESSPOOL resource rules. If a rule has been determined not to have been used within the last 2 years, the rule shall be removed.

Pro Tips

Lavender hyperlinks in small type off to the right (of CSS class id, if you view the page source) point to globally unique URIs for each document and item. Copy the link location and paste anywhere you need to talk unambiguously about these things.

You can obtain data about documents and items in other formats. Simply provide an HTTP header Accept: text/turtle or Accept: application/rdf+xml.

Powered by sagemincer