The running configuration must be synchronized with the startup configuration after changes have been made and implemented.

From Perimeter L3 Switch Security Technical Implementation Guide

Part of Running and startup configurations are not synchronized.

SV-3072r3_rule The running configuration must be synchronized with the startup configuration after changes have been made and implemented.

Vulnerability discussion

If the running and startup router configurations are not synchronized properly and a router malfunctions, it will not restart with all of the recent changes incorporated. If the recent changes were security related, then the routers would be vulnerable to attack.

Check content

Review the running and boot configurations to determine if they are synchronized. IOS Procedure: With online editing, the "show running-config" command will only show the current running configuration settings, which are different from the IOS defaults. The "show startup-config" command will show the NVRAM startup configuration. Compare the two configurations to ensure they are synchronized. JUNOS Procedure: This will never be a finding. The active configuration is stored on flash as juniper.conf. A candidate configuration allows configuration changes while in configuration mode without initiating operational changes. The router implements the candidate configuration when it is committed; thereby, making it the new active configuration--at which time it will be stored on flash as juniper.conf and the old juniper.conf will become juniper.conf.1. If running configuration and boot configurations are not the same, this is a finding.

Fix text

Add procedures to the standard operating procedure to keep the running configuration synchronized with the startup configuration.

Pro Tips

Lavender hyperlinks in small type off to the right (of CSS class id, if you view the page source) point to globally unique URIs for each document and item. Copy the link location and paste anywhere you need to talk unambiguously about these things.

You can obtain data about documents and items in other formats. Simply provide an HTTP header Accept: text/turtle or Accept: application/rdf+xml.

Powered by sagemincer