The HP FlexFabric Switch must have the default VLAN pruned from all trunk ports that do not require it.

From HP FlexFabric Switch L2S Security Technical Implementation Guide

Associated with: CCI-000366

SV-80579r1_rule The HP FlexFabric Switch must have the default VLAN pruned from all trunk ports that do not require it.

Vulnerability discussion

The default VLAN (i.e., VLAN 1) is a special VLAN used for control plane traffic such as Spanning-Tree Protocol (STP), Dynamic Trunking Protocol (DTP), VLAN Trunking Protocol (VTP), and Port Aggregation Protocol (PAgP). VLAN 1 is enabled on all trunks and ports by default. With larger campus networks, care needs to be taken about the diameter of the STP domain for the default VLAN. Instability in one part of the network could affect the default VLAN, thereby influencing control-plane stability and therefore STP stability for all other VLANs.

Check content

Review the HP FlexFabric Switch configuration and verify that the default VLAN is pruned from trunk links that do not require it. If the default VLAN is not pruned from trunk links that should not be transporting frames for the VLAN, this is a finding. display vlan 1 VLAN ID: 1 VLAN type: Static Route interface: Configured Description: VLAN 0001 Name: VLAN 0001 Tagged ports: None Untagged ports: GigabitEthernet1/0/1 GigabitEthernet1/0/2 GigabitEthernet1/0/3 GigabitEthernet1/0/4 GigabitEthernet1/0/5 GigabitEthernet1/0/6 GigabitEthernet1/0/7 GigabitEthernet1/0/8

Fix text

Remove the native vlan from trunks that do not require it. [HP-interface GigabitEthernet1/0/1] undo port trunk permit vlan 1

Pro Tips

Lavender hyperlinks in small type off to the right (of CSS class id, if you view the page source) point to globally unique URIs for each document and item. Copy the link location and paste anywhere you need to talk unambiguously about these things.

You can obtain data about documents and items in other formats. Simply provide an HTTP header Accept: text/turtle or Accept: application/rdf+xml.