The HP FlexFabric Switch must have all trunk links enabled statically.

From HP FlexFabric Switch L2S Security Technical Implementation Guide

Associated with: CCI-000366

SV-80571r1_rule The HP FlexFabric Switch must have all trunk links enabled statically.

Vulnerability discussion

When trunk negotiation is enabled via Dynamic Trunk Protocol (DTP), considerable time can be spent negotiating trunk settings (802.1q or ISL) when a node or interface is restored. While this negotiation is happening, traffic is dropped because the link is up from a layer 2 perspective. Packet loss can be eliminated by setting the interface statically to trunk mode, thereby avoiding dynamic trunk protocol negotiation and significantly reducing any outage when restoring a failed link or switch.

Check content

Review the HP FlexFabric Switch configuration to verify that trunk negotiation is disabled by statically configuring all trunk links. Configuring a command to manually disable negotiation may also be required for some switch platforms. If trunk negotiation is enabled on any interface, this is a finding. Sample output: interface GigabitEthernet1/0/1 port link-type trunk port trunk permit vlan X

Fix text

Configure the HP FlexFabric Switch to enable trunk links statically. [HP-GigabitEthernet1/0/1]port link-type trunk

Pro Tips

Lavender hyperlinks in small type off to the right (of CSS class id, if you view the page source) point to globally unique URIs for each document and item. Copy the link location and paste anywhere you need to talk unambiguously about these things.

You can obtain data about documents and items in other formats. Simply provide an HTTP header Accept: text/turtle or Accept: application/rdf+xml.