From HP FlexFabric Switch L2S Security Technical Implementation Guide
Part of SRG-NET-000362-L2S-000027
Associated with: CCI-002385
DAI intercepts Address Resolution Protocol (ARP) requests and verifies that each of these packets has a valid IP-to-MAC address binding before updating the local ARP cache and before forwarding the packet to the appropriate destination. Invalid ARP packets are dropped and logged. DAI determines the validity of an ARP packet based on valid IP-to-MAC address bindings stored in the DHCP snooping binding database. If the ARP packet is received on a trusted interface, the switch forwards the packet without any checks. On untrusted interfaces, the switch forwards the packet only if it is valid.
Review the HP FlexFabric Switch configuration to verify that Dynamic ARP Inspection (DAI) feature is enabled on all user VLANs. If DAI is not enabled on all user VLANs, this is a finding. [HP]display arp detection ARP detection is enabled in the following VLANs: 2 [HP]display arp detection statistics interface Ten-GigabitEthernet 1/0/11 State: U-Untrusted T-Trusted ARP packets dropped by ARP inspect checking: Interface(State) IP Src-MAC Dst-MAC Inspect XGE1/0/11(T) 0 0 0 0 [HP]
Configure the HP FlexFabric Switch to have Dynamic ARP Inspection (DAI) enabled on all user VLANs. [HP-vlan2]arp detection enable [HP-Ten-GigabitEthernet1/0/11]arp detection trust
Lavender hyperlinks in small type off to the right (of CSS
class id, if you view the page source) point to
globally unique URIs for each document and item. Copy the
link location and paste anywhere you need to talk
unambiguously about these things.
You can obtain data about documents and items in other
formats. Simply provide an HTTP header Accept:
text/turtle or
Accept: application/rdf+xml.
Powered by sagemincer