HP FlexFabric Switch must authenticate all network-connected endpoint devices before establishing any connection.

From HP FlexFabric Switch L2S Security Technical Implementation Guide

Associated with: CCI-001958

SV-80541r1_rule HP FlexFabric Switch must authenticate all network-connected endpoint devices before establishing any connection.

Vulnerability discussion

Controlling LAN access via 802.1x authentication or MAC authentication can assist in preventing a malicious user from connecting an unauthorized PC to a switch port to inject or receive data from the network without detection.

Check content

Verify all access switch ports connecting to LAN outlets are configured for 802.1x or MAC authentication as shown in these configuration examples. 802.1x example: interface Ten-GigabitEthernet1/0/4 port link-mode bridge port access vlan 200 dot1x MAC authentication example: interface Ten-GigabitEthernet1/0/5 port link-mode bridge port access vlan 200 mac-authentication If all access switch ports connecting to LAN outlets are not configured for 802.1x or MAC authentication, this is a finding.

Fix text

Configure 802.1 x authentications on all host-facing access switch ports. To authenticate those devices that do not support 802.1x, MAC Authentication Bypass must be configured. [HP] dot1x [HP] dot1x authentication-method eap [HP] domain radius jitc [HP] radius scheme jitc [HP-radius-jitc]radius scheme jitc [HP-radius-jitc]primary authentication 15.252.76.124 [HP-radius-jitc]primary accounting 15.252.76.124 [HP-radius-jitc]accounting-on enable [HP-radius-jitc]key authentication simple test123 [HP-radius-jitc]user-name-format without-domain [HP-radius-jitc]nas-ip 15.252.78.99 [HP]domain jitc [HP-isp-jitc]domain jitc [HP-isp-jitc]authentication lan-access radius-scheme jitc [HP-isp-jitc]authorization lan-access radius-scheme jitc [HP] interface gigbitethernet 1/0/1 [HP-Gigabitethernet1/0/1] undo dot1x handshake dot1x mandatory-domain jitc undo dot1x multicast-trigger

Pro Tips

Lavender hyperlinks in small type off to the right (of CSS class id, if you view the page source) point to globally unique URIs for each document and item. Copy the link location and paste anywhere you need to talk unambiguously about these things.

You can obtain data about documents and items in other formats. Simply provide an HTTP header Accept: text/turtle or Accept: application/rdf+xml.