The router must use its loopback interface address as the source address for all iBGP peering sessions.

From Infrastructure Router Security Technical Implementation Guide Cisco

Part of Loopback address is not used as the iBGP source IP.

SV-15359r2_rule The router must use its loopback interface address as the source address for all iBGP peering sessions.

Vulnerability discussion

Using a loopback address as the source address offers a multitude of uses for security, access, management, and scalability. It is easier to construct appropriate filters for control plane traffic. Log information recorded by authentication and syslog servers will record the router’s loopback address instead of the numerous physical interface addresses.

Check content

Verify that the peering session with iBGP neighbors use the loopback address as the source address as shown in the example below: interface loopback 0 ip address 10.10.2.1 255.255.255.255 … router bgp 100 neighbor 200.200.200.2 remote-as 200 neighbor 188.20.120.2 remote-as 144 neighbor 10.10.2.2 remote-as 100 neighbor 10.10.2.2 update-source Loopback0 neighbor 10.10.2.3 remote-as 100 neighbor 10.10.2.3 update-source Loopback0

Fix text

Configure the network device's loopback address as the source address for iBGP peering.

Pro Tips

Lavender hyperlinks in small type off to the right (of CSS class id, if you view the page source) point to globally unique URIs for each document and item. Copy the link location and paste anywhere you need to talk unambiguously about these things.

You can obtain data about documents and items in other formats. Simply provide an HTTP header Accept: text/turtle or Accept: application/rdf+xml.

Powered by sagemincer