From Network Infrastructure Policy Security Technical Implementation Guide
Part of NET2004
Associated with: CCI-000366
Spanning Tree Protocol (STP) is implemented on bridges and switches to prevent Layer 2 loops when a broadcast domain spans multiple bridges and switches and when redundant links are provisioned to provide high availability in case of link failures. Convergence time can be significantly reduced using Rapid STP (802.1w) instead of STP (802.1d), resulting in improved availability. Rapid STP should be deployed by implementing either Rapid Per-VLAN-Spanning-Tree (Rapid-PVST) or Multiple Spanning-Tree Protocol (MSTP), the later scales much better when there are many VLANs.
In cases where VLANs do not span multiple switches it is a best practice to not implement STP. Avoiding the use of STP will provide the most deterministic and highly available network topology. If STP is required, then review the switch configuration to verify that RSTP or MSTP has been implemented. Following are example configurations: RSTP spanning-tree mode rapid-pvst MST spanning-tree mode mst spanning-tree mst configuration name Region1 revision 1 instance 1 vlan 10, 11, 12 instance 2 vlan 13, 14 If RSTP or MSTP has not been implemented where STP is required, this is a finding. Note: Note: Cisco has implemented RSTP as part of MSTP and Rapid-PVST+.
Configure Rapid STP be implemented at the access and distribution layers where VLANs span multiple switches.
Lavender hyperlinks in small type off to the right (of CSS
class id, if you view the page source) point to
globally unique URIs for each document and item. Copy the
link location and paste anywhere you need to talk
unambiguously about these things.
You can obtain data about documents and items in other
formats. Simply provide an HTTP header Accept:
text/turtle or
Accept: application/rdf+xml.
Powered by sagemincer