The Juniper Networks SRX Series Gateway IDPS must block outbound traffic containing known and unknown DoS attacks by ensuring that rules are applied to outbound communications traffic.

From Juniper SRX SG IDPS Security Technical Implementation Guide

Part of SRG-NET-000192-IDPS-00140

Associated with: CCI-001095

SV-80885r1_rule The Juniper Networks SRX Series Gateway IDPS must block outbound traffic containing known and unknown DoS attacks by ensuring that rules are applied to outbound communications traffic.

Vulnerability discussion

The IDPS must include protection against DoS attacks that originate from inside the enclave which can affect either internal or external systems. These attacks may use legitimate or rogue endpoints from inside the enclave. Installation of IDPS detection and prevention components (i.e., sensors) at key boundaries in the architecture mitigates the risk of DoS attacks. These attacks can be detected by matching observed communications traffic with patterns of known attacks and monitoring for anomalies in traffic volume/type.To comply with this requirement, the IDPS must inspect outbound traffic for indications of known and unknown DoS attacks. Sensor log capacity management along with techniques which prevent the logging of redundant information during an attack also guard against DoS attacks. This requirement is used in conjunction with other requirements which require configuration of security policies, signatures, rules, and anomaly detection techniques and are applicable to both inbound and outbound traffic.

Check content

Determine the names of the IDP policies by asking the site representative. From operational mode, enter the following command to verify outbound zones are configured with an IDP policy. show security policies If zones bound to the outbound interfaces, including VPN zones, are not configured with an IDP policy, this is a finding.

Fix text

To enable IDP services on outbound traffic on the device, first create a security policy for the traffic flowing in one direction, then specify the action to be taken on traffic that matches conditions specified in the policy. [edit security policies from-zone to-zone policy idp-app-policy-1] set match source-address any destination-address any application any [edit security policies from-zone to-zone untrusted-zone-name> policy ] set then permit application-services idp

Pro Tips

Lavender hyperlinks in small type off to the right (of CSS class id, if you view the page source) point to globally unique URIs for each document and item. Copy the link location and paste anywhere you need to talk unambiguously about these things.

You can obtain data about documents and items in other formats. Simply provide an HTTP header Accept: text/turtle or Accept: application/rdf+xml.

Powered by sagemincer