The network device must drop half-open TCP connections through filtering thresholds or timeout periods.

From Perimeter L3 Switch Security Technical Implementation Guide - Cisco

Part of Devices not configured to filter and drop half-open connections.

Associated with IA controls: ECSC-1

SV-15435r4_rule The network device must drop half-open TCP connections through filtering thresholds or timeout periods.

Vulnerability discussion

A TCP connection consists of a three-way handshake message sequence. A connection request is transmitted by the originator, an acknowledgement is returned from the receiver, and then an acceptance of that acknowledgement is sent by the originator.An attacker’s goal in this scenario is to cause a denial of service to the network or device by initiating a high volume of TCP packets, then never sending an acknowledgement, leaving connections in a half-opened state. Without the device having a connection or time threshold for these half-opened sessions, the device risks being a victim of a denial of service attack. Setting a TCP timeout threshold will instruct the device to shut down any incomplete connections. Services such as SSH, BGP, SNMP, LDP, etc. are some services that may be prone to these types of denial of service attacks. If the router does not have any BGP connections with BGP neighbors across WAN links, values could be set to even tighter constraints.

Check content

Review the device configuration to validate threshold filters or timeout periods are set for dropping excessive half-open TCP connections. For timeout periods, the time should be set to 10 seconds or less. If the device can not be configured for 10 seconds or less, it should be set to the least amount of time allowable in the configuration. Threshold filters will need to be determined by the organization for optimal filtering. IOS Configuration Example: ip tcp synwait-time 10

Fix text

Configure the device to drop half-open TCP connections through threshold filtering or timeout periods.

Pro Tips

Lavender hyperlinks in small type off to the right (of CSS class id, if you view the page source) point to globally unique URIs for each document and item. Copy the link location and paste anywhere you need to talk unambiguously about these things.

You can obtain data about documents and items in other formats. Simply provide an HTTP header Accept: text/turtle or Accept: application/rdf+xml.

Powered by sagemincer