From Arista MLS DCS-7000 Series RTR Security Technical Implementation Guide
Part of SRG-NET-000205-RTR-000108
Associated with: CCI-001097
The Neighbor Discovery protocol allows a hop limit value to be advertised by routers in a Router Advertisement message to be used by hosts instead of the standardized default value. If a very small value was configured and advertised to hosts on the LAN segment, communications would fail due to the hop limit reaching zero before the packets sent by a host reached their destination.
Review the router configuration to determine if the maximum hop limit has been configured. If it has been configured, then it must be set to at least 32. If it has not been configured, the default value must be determined. The default value for the Arista MLS is 64. Review the interface configuration via the "show running-config" command for the statement ipv6 nd ra hop-limit 32 If the default value is below 32 and the maximum hop limit value has not been configured (set to at least 32), this is a finding. In any case, maximum hop limit must be at least 32.
Configure the router maximum hop limit value to at least 32. From the interface configuration mode, enter: ipv6 nd ra hop-limit 32
Lavender hyperlinks in small type off to the right (of CSS
class id, if you view the page source) point to
globally unique URIs for each document and item. Copy the
link location and paste anywhere you need to talk
unambiguously about these things.
You can obtain data about documents and items in other
formats. Simply provide an HTTP header Accept:
text/turtle or
Accept: application/rdf+xml.
Powered by sagemincer