From Arista MLS DCS-7000 Series RTR Security Technical Implementation Guide
Part of SRG-NET-000168-RTR-000077
Associated with: CCI-000803
A rogue router could send a fictitious routing update to convince a site's perimeter router to send traffic to an incorrect or even a rogue destination. This diverted traffic could be analyzed to learn confidential information about the site's network, or merely used to disrupt the network's ability to communicate with other networks. This is known as a "traffic attraction attack" and is prevented by configuring neighbor router authentication for routing updates. However, using clear-text authentication provides little benefit since an attacker can intercept traffic and view the authentication key. This would allow the attacker to use the authentication key in an attack.
Review the router configuration for the following configuration statement under the interface configuration for any interface participating in the OSPF topology. SHA1 must be used instead of MD5 in all cases when that option is available. ip ospf authentication message-digest ip ospf message-digest-key [number] md5 [type] [key] For IPv6 Authentication, one of the following statements must be present under the ipv6 router OSPF configuration statement, or on any interface running OSPFv3, depending on the type of encryption established. There are two methods of authentication for OSPFv3 in this scenario; the first uses authentication header (AH), and the second uses Authentication Header with Encapsulating Security Payload. OSPFv3 authentication can be configured for an interface or an area, and interface configuration will override area configuration. Users may configure a key or a passphrase. interface ethernet1 ipv6 ospf authentication ipsec spi [spi number] [md5/sha1] [passphrase/key] [0/7] [passphrase/key] OR interface ethernet1 ipv6 ospf encryption ipsec spi [spi number] esp null [md5/sha1] [passphrase/key] [0/7] [passphrase/key] In an area configuration, the following text must be included under the "ipv6 router ospf [process ID]" configuration section. ipv6 router ospf 200 area [area number] authentication ipsec spi [spi number] [md5/sha1] [passphrase/key] [0/7] [passphrase/key] OR for ESP ipv6 router ospf 200 area 0 encryption ipsec spi [spi] esp null [md5/sha1] [0/7] [key] | passphrase [0/7] [key] If either of these statements is not present, OSPF is not using encryption for authentication, and this is a finding.
Configure routing protocol authentication to encrypt the authentication key via the following commands under the interface configuration mode. SHA1 must be used instead of MD5 in all cases when that option is available. ip ospf authentication message-digest ip ospf message-digest-key [number] md5 [type] [key] For IPv6 global configuration, enter: ipv6 router ospf [process number] area [area number] authentication ipsec spi [spi number] [md5/sha1] [passphrase/key] [0/7] [passphrase/key] Alternatively, under the interface configuration mode, enter: ipv6 ospf authentication ipsec spi [spi number] [md5/sha1] [passphrase/key] [0/7] [passphrase/key] To use ESP encryption on AH headers, instead enter: ipv6 router ospf [process number] area [area number] encryption ipsec spi [spi number] esp null [md5/sha1] [passphrase/key] [0/7] [passphrase/key] or on an interface: ipv6 ospf encryption ipsec spi [spi number] esp null [md5/sha1] [passphrase/key] [0/7] [passphrase/key]
Lavender hyperlinks in small type off to the right (of CSS
class id, if you view the page source) point to
globally unique URIs for each document and item. Copy the
link location and paste anywhere you need to talk
unambiguously about these things.
You can obtain data about documents and items in other
formats. Simply provide an HTTP header Accept:
text/turtle or
Accept: application/rdf+xml.
Powered by sagemincer