The A10 Networks ADC must restrict management connections to the management network.

From A10 Networks ADC NDM Security Technical Implementation Guide

Associated with: CCI-001368

SV-82587r1_rule The A10 Networks ADC must restrict management connections to the management network.

Vulnerability discussion

Remote administration is inherently dangerous because anyone with a sniffer and access to the right LAN segment could acquire the device account and password information. With this intercepted information they could gain access to the infrastructure and cause denial of service attacks, intercept sensitive information, or perform other destructive actions.

Check content

Ask the device administrator what the subnet assigned to the management network is and which access-list is used to restrict management traffic. Review the device configuration. The following command displays a configured access-list: show access-list [ipv4 | ipv6] [acl-id] If no access list for the management network is configured, this is a finding. If the access list for the management network does not restrict traffic solely to the management network, this is a finding. The following command displays information about the management interface: show interface management If the access list is not applied to the management interface, this is a finding.

Fix text

Configure an ACL or filter to restrict management access to the device from only the management network. The following commands configure an access control list that only allows traffic from the management network and logs denied traffic: access-list [acl-num] permit access-list [acl-num] permit source-ipaddr {filter-mask | /mask-length} access-list [acl-num] deny any log Note: The source-ipadd and mask must be the subnet used for the management network. The following commands apply the ACL to the management interface: interface management access-list [acl-num] in Note that acl-num is the number assigned to the ACL configured above.

Pro Tips

Lavender hyperlinks in small type off to the right (of CSS class id, if you view the page source) point to globally unique URIs for each document and item. Copy the link location and paste anywhere you need to talk unambiguously about these things.

You can obtain data about documents and items in other formats. Simply provide an HTTP header Accept: text/turtle or Accept: application/rdf+xml.