The A10 Networks ADC must not use the default admin account.

From A10 Networks ADC NDM Security Technical Implementation Guide

Part of SRG-APP-000148-NDM-000246

Associated with: CCI-000764

SV-82541r1_rule The A10 Networks ADC must not use the default admin account.

Vulnerability discussion

To assure accountability and prevent unauthenticated access, organizational administrators must be uniquely identified and authenticated for all network management accesses to prevent potential misuse and compromise of the system.The use of a default password for any account, especially one for administrative access, can quickly lead to a compromise of the device and subsequently, the entire enclave or system. The "admin" account is intended solely for the initial setup of the device and must be disabled when the device is initially configured. The default password for this account must immediately be changed at the first logon of an authorized administrator.The ACOS device comes with one admin account, "admin", by default. The "admin" account has global Read Write privileges. The admin account, and other admin accounts with global Read Write privileges, can configure additional admin accounts. Since this account, if misused, can easily compromise the device, it must be disabled.

Check content

Attempt to log on to the device using the default administrator logon and password. If the logon is successful, this is a finding. Review the device configuration. The following command shows all of the configured accounts on the device: show admin If the admin account is enabled, this is a finding.

Fix text

The following command changes the admin password for the account "admin" to the character string entered: admin admin password [newpassword] The prompt will change to show that the admin account is being configured. The following command disables the account: disable

Pro Tips

Powered by sagemincer