The system must not send IPv4 ICMP redirects.

From SOLARIS 10 SPARC SECURITY TECHNICAL IMPLEMENTATION GUIDE

Part of GEN003610

Associated with: CCI-001551

SV-26632r2_rule The system must not send IPv4 ICMP redirects.

Vulnerability discussion

ICMP redirect messages are used by routers to inform hosts that a more direct route exists for a particular destination. These messages contain information from the system's route table that could reveal portions of the network topology.

Check content

Determine the type of zone that you are currently securing. # zonename If the zone is not the global zone, determine if any interfaces are exclusive to the zone: # dladm show-link If the output indicates "insufficient privileges" then this requirement is not applicable. If the zone is the global zone or the non-global zone has exclusive interfaces verify the system does not send IPv4 ICMP redirect messages. Procedure: # ndd /dev/ip ip_send_redirects If the result is not 0, this is a finding.

Fix text

Configure the system to not send IPv4 ICMP redirect messages. Procedure: # ndd -set /dev/ip ip_send_redirects 0 Also add this command to a system startup script.

Pro Tips

Lavender hyperlinks in small type off to the right (of CSS class id, if you view the page source) point to globally unique URIs for each document and item. Copy the link location and paste anywhere you need to talk unambiguously about these things.

You can obtain data about documents and items in other formats. Simply provide an HTTP header Accept: text/turtle or Accept: application/rdf+xml.

Powered by sagemincer