The DataPower Gateway providing content filtering must generate an alert to, at a minimum, the ISSO and ISSM when user level intrusions which provide non-privileged access are detected.

From IBM DataPower ALG Security Technical Implementation Guide

Part of SRG-NET-000392-ALG-000147

Associated with: CCI-002664

SV-79789r1_rule The DataPower Gateway providing content filtering must generate an alert to, at a minimum, the ISSO and ISSM when user level intrusions which provide non-privileged access are detected.

Vulnerability discussion

Without an alert, security personnel may be unaware of major detection incidents that require immediate action and this delay may result in the loss or compromise of information.The ALG generates an alert which notifies designated personnel of the Indicators of Compromise (IOCs) which require real-time alerts. These messages should include a severity level indicator or code as an indicator of the criticality of the incident. These indicators reflect the occurrence of a compromise or a potential compromise.Since these incidents require immediate action, these messages are assigned a critical or level 1 priority/severity, depending on the system's priority schema.CJCSM 6510.01B, "Cyber Incident Handling Program", lists nine Cyber Incident and Reportable Event Categories. DoD has determined that categories identified by CJCSM 6510.01B Major Indicators (category 1, 2, 4, or 7 detection events) will require an alert when an event is detected.Alerts may be transmitted, for example, telephonically, by electronic mail messages, or by text messaging. The ALG must either send the alert to a management console that is actively monitored by authorized personnel or use a messaging capability to send the alert directly to designated personnel.

Check content

In the DataPower WebGUI, navigate to Administration >> Access >> SNMP Settings. On the "Trap Event Subscriptions" tab, verify the inclusion of Event Subscriptions that are judged to be associated with the detection of root level intrusion events that provide unauthorized privileged access. If the Event Subscriptions are not configured, this is a finding. On the "Trap and Notification Targets" tab, verify the inclusion of an approved SNMP server. If no SNMP Server is configured as a Trap and Notification Target, this is a finding.

Fix text

In the DataPower WebGUI, navigate to Administration >> Access >> SNMP Settings. Configure the "Trap Event Subscriptions" tab to include Event Subscriptions that are judged to be associated with the detection of user level intrusions which provide non-privileged access. Configure the "Trap and Notification Targets" tab to include an approved SNMP server that generates alerts that will be forwarded, at a minimum, to the ISSO and ISSM.

Pro Tips

Powered by sagemincer