The HP FlexFabric Switch must protect against or limit the effects of all known types of Denial of Service (DoS) attacks on the HP FlexFabric Switch management network by employing organization-defined security safeguards.

From HP FlexFabric Switch NDM Security Technical Implementation Guide

Part of SRG-APP-000435-NDM-000315

Associated with: CCI-002385

SV-80753r1_rule The HP FlexFabric Switch must protect against or limit the effects of all known types of Denial of Service (DoS) attacks on the HP FlexFabric Switch management network by employing organization-defined security safeguards.

Vulnerability discussion

DoS is a condition when a resource is not available for legitimate users. When this occurs, the organization either cannot accomplish its mission or must operate at degraded capacity.This requirement addresses the configuration of network devices to mitigate the impact of DoS attacks that have occurred or are ongoing on device availability. For each network device, known and potential DoS attacks must be identified and solutions for each type implemented. A variety of technologies exist to limit or, in some cases, eliminate the effects of DoS attacks (e.g., limiting processes or restricting the number of sessions the device opens at one time). Employing increased capacity and bandwidth, combined with service redundancy, may reduce the susceptibility to some DoS attacks.The security safeguards cannot be defined at the DoD level because they vary according to the capabilities of the individual network devices and the security controls applied on the adjacent networks (for example, firewalls performing packet filtering to block DoS attacks).

Check content

Check if the HP FlexFabric Switch is configured to protect against known DoS attacks by implementing ACLs and by enabling tcp syn-flood protection: [HP] display current-configuration tcp syn-cookie enable tcp timer syn-timeout 10 [HP] display acl all If the HP FlexFabric Switch is not configured with ACLs and tcp syn-flood features, this is a finding. Check pre-defined qos policies that are by default applied to the control plane: [HP] display qos policy control-plane pre-defined Check user-defined qos policies: [HP] display qos policy user-defined

Fix text

Configure the HP FlexFabric Switch to protect against or limit the effects of all known types of DoS attacks by employing organization-defined security safeguards. Enable the anti-attack function: [HP] tcp syn-cookie enable Configure maximum wait time to establish a TCP connection: [HP] tcp timer syn-timeout 10 Configure QoS policy and apply it to the control plane: [HP] traffic classifier Net-Protocols operator or [HP-classifier Net-Protocols] if match control-plane protocol icmp [HP-classifier Net-Protocols] quit [HP] traffic behavior Net-Protocols [HP-behavior-Net-Protocols] car cir 320 [HP-behavior-Net-Protocols] quit [HP] qos policy Net-protocols [HP-qospolicy-Net-Protocols] classifier Net-Protocols behavior Net-protocols [HP-qospolicy-Net-Protocols] quit [HP] control-plane slot 1 [HP-cp-slot1] qos apply policy Net-Protocols inbound Note: In addition, ACLs can be deployed to address specific types of attacks based on IP, MAC, protocols and ports. Note: By default, the HP FlexFabric Switches are configured with pre-defined control plane QoS policies, which take effect on the control planes by default.

Pro Tips

Lavender hyperlinks in small type off to the right (of CSS class id, if you view the page source) point to globally unique URIs for each document and item. Copy the link location and paste anywhere you need to talk unambiguously about these things.

You can obtain data about documents and items in other formats. Simply provide an HTTP header Accept: text/turtle or Accept: application/rdf+xml.

Powered by sagemincer