From Traditional Security
Part of Information Security (INFOSEC) - Secure Room Standards - Structural Integrity Check
Associated with IA controls: PESP-1, PESS-1, PEPF-2
Failure to ensure that there is structural integrity of the physical perimeter surrounding a secure room (AKA: collateral classified open storage area) IAW DoD Manual 5200.01, Volume 3 could result in the undetected loss or compromise of classified material.
BACKGROUND: In spite of all physical security defensive devices deployed, the possibility of an intrusion always exists. The highest fence can be scaled, the most dense wall can be breached and the stoutest lock can be compromised. Even highly sophisticated alarm systems can be contravened by a knowledgeable professional. It is therefore necessary to institute a system of checks to physically inspect secure perimeters to check for signs of attempted intrusions and ensure that structural integrity of the perimeter is maintained. This requirement is concerned with ensuring there is periodic visual validation of structural integrity of secure room/collateral classified open storage area perimeters containing SIPRNet assets and associated media. It ensures that any breach or attempted breach of the walls, true floors and true ceilings of a secure area (which are not readily visible) are discovered in a timely manner. In Check #1 there are 3 different situations covered and each requires a different level of physical/visual validation for structural integrity. Check #1. Check to ensure that structural integrity of secure rooms or spaces containing SIPRNet equipment is validated as follows: Situation #1 (No structural integrity checks required): If interior IDS (motion detection) is *properly employed (*directly covering all SIPRNet assets) within the secure room or collateral classified open storage space where classified SIPRNet assets are located AND under raised floor spaces (if applicable) AND above suspended ceiling spaces (if applicable), then no physical check for structural integrity is required. This is contingent upon the interior motion sensors being activated when the room is closed or unattended, and that the sensors work properly as determined by required checks of sensor functionality. Situation #2 (Monthly checks required): If motion sensors are properly employed ONLY within the secure room space where classified assets are located, then a visual check of spaces below raised floor, above suspended ceilings and anywhere else the perimeter of the secure area cannot be readily observed must be conducted on at least a monthly basis. The goal is to visually inspect all walls, true floor and true ceiling perimeters for signs of breach or attempted breach. Situation #3 (Weekly checks required): When random checks (not exceeding 4-hours) of secure rooms or open storage spaces are used in lieu of IDS then the checks specified in situation #2 for above suspended ceilings and below raised floors must be conducted at least weekly. The increased frequency of checks is due to the significant vulnerability of the SIPRNet assets to undetected attack from portions of the perimeter that cannot be readily observed. NOTE: Physical inspection of the perimeter walls, floor and ceiling can be greatly expedited and may be conducted without ladders or other equipment where there are no false/suspended ceilings and/or raised floors within or surrounding the secure room or area. Check #2. Check to ensure there are written procedures developed for the checks and that the checks are documented and maintained on file for a minimum of 90 days. Where discrepancies (holes in perimeter or other signs of successful or attempted access) are noted these checks will be maintained indefinitely or until an inquiry determines the cause of the discrepancy. TACTICAL ENVIRONMENT: This check is applicable where Secure Rooms are used to protect classified materials or systems in a tactical environment. The only exception will be for urgent (short term) tactical operations or other contingency situations where fixed facilities and equipment are not yet present or incapable of being used.
BACKGROUND: This fix is concerned with ensuring there is periodic visual validation of structural integrity of secure room/collateral classified open storage area perimeters containing SIPRNet assets and associated media. It ensures that any breach or attempted breach of the walls, true floors and true ceilings of a secure area (which are not readily visible) are discovered in a timely manner. In requirement #1 there are 3 different situations covered and each requires a different level of physical/visual validation for structural integrity. Requirement #1. Structural integrity of secure rooms or spaces containing SIPRNet equipment must be validated in each situation as follows: Situation #1 (No structural integrity checks required): If interior IDS (motion detection) is *properly employed (*directly covering all SIPRNet assets) within the secure room or collateral classified open storage space where classified SIPRNet assets are located AND under raised floor spaces (if applicable) AND above suspended ceiling spaces (if applicable), then no physical check for structural integrity is required. This is contingent upon the interior motion sensors being activated when the room is closed or unattended, and that the sensors work properly as determined by required checks of sensor functionality. Situation #2 (Monthly checks required): If motion sensors are properly employed ONLY within the secure room space where classified assets are located, then a visual check of spaces below raised floor, above suspended ceilings and anywhere else the perimeter of the secure area cannot be readily observed must be conducted on at least a monthly basis. The goal is to visually inspect all walls, true floor and true ceiling perimeters for signs of breach or attempted breach. Situation #3 (Weekly checks required): When random checks (not exceeding 4-hours) of secure rooms or open storage spaces are used in lieu of IDS then the checks specified in situation #2 for above suspended ceilings and below raised floors must be conducted at least weekly. The increased frequency of checks is due to the significant vulnerability of the SIPRNet assets to undetected attack from portions of the perimeter that cannot be readily observed. NOTE: Physical inspection of the perimeter walls, floor and ceiling can be greatly expedited and may be conducted without ladders or other equipment where there are no false/suspended ceilings and/or raised floors within or surrounding the secure room or area. Requirement #2. There must be written procedures developed for the checks and that the checks are documented and maintained on file for a minimum of 90 days. Where discrepancies (holes in perimeter or other signs of successful or attempted access) are noted these checks will be maintained indefinitely or until an inquiry determines the cause of the discrepancy.
Lavender hyperlinks in small type off to the right (of CSS
class id, if you view the page source) point to
globally unique URIs for each document and item. Copy the
link location and paste anywhere you need to talk
unambiguously about these things.
You can obtain data about documents and items in other
formats. Simply provide an HTTP header Accept:
text/turtle or
Accept: application/rdf+xml.
Powered by sagemincer