The administrator must ensure that a PIM neighbor filter is bound to all interfaces that have PIM enabled.

From Perimeter Router Security Technical Implementation Guide Juniper

Part of PIM neighbor filter is not configured

SV-40316r1_rule The administrator must ensure that a PIM neighbor filter is bound to all interfaces that have PIM enabled.

Vulnerability discussion

Protocol Independent Multicast (PIM) is a routing protocol used to build multicast distribution tress for forwarding multicast traffic across the network infrastructure. PIM traffic must be limited to only known PIM neighbors by configuring and binding a PIM neighbor filter to those interfaces that have PIM enabled.

Check content

Review the router or multi-layer switch to determine if either IPv4 or IPv6 multicast routing is enabled. If either is enabled, verify that all interfaces enabled for PIM has a neighbor filter to only accept PIM control plane traffic from the documented routers according to the multicast topology diagram. JUNOS does not have a PIM neighbor filter; Hence, a firewall filter will have to be used similar to the example shown below. Step 1: Verify that an input filter is configured that will specify the allowable PIM neighbors similar to the following example. firewall { filter input-filter { term pim-neighbors { from { source-address { 192.0.2.1/32; 192.0.2.3/32; } destination-address { 224.0.0.13/32; } protocol pim; } then accept; } term … Step 2: Verify that an input filter is applied to all PIM enabled interfaces. The configuration should look similar to the following: interfaces fe-1/1/1 { unit 0 { family inet { filter { input input-filter; } address 192.0.2.2/32; } } } To determine which interfaces are enabled for PIM, review the interface section within the protocols pim hierarchy that will look similar to the following example: protocols { … pim { interface all { mode sparse; } } }

Fix text

If IPv4 or IPv6 multicast routing is enabled, ensure that all interfaces enabled for PIM has a neighbor filter to only accept PIM control plane traffic from the documented routers according to the multicast topology diagram.

Pro Tips

Lavender hyperlinks in small type off to the right (of CSS class id, if you view the page source) point to globally unique URIs for each document and item. Copy the link location and paste anywhere you need to talk unambiguously about these things.

You can obtain data about documents and items in other formats. Simply provide an HTTP header Accept: text/turtle or Accept: application/rdf+xml.

Powered by sagemincer