From Perimeter Router Security Technical Implementation Guide Juniper
Part of The management interface is not IGP passive.
The OOBM access switch will connect to the management interface of the managed network elements. The management interface can be a true OOBM interface or a standard interface functioning as the management interface. In either case, the management interface of the managed network element will be directly connected to the OOBM network.
If the managed network element is a layer 3 device, review the configuration to verify the management interface is configured as passive for the IGP instance for the managed network. With JUNOS, routing protocols are enabled on the interfaces by specifying the interface under the routing protocol hierarchy. The following configuration would be an example where OSPF is only enabled on all interfaces except the management interface: interfaces { fe-0/0/0 { description “link to our Private Net” unit 0 { family inet { address 172.20.4.2/24; } } } fe-0/0/1 { description “link to our Service Net” unit 0 { family inet { address 172.20.5.2/24; } } } fe-0/0/2 { description “link to our Management LAN” unit 0 { family inet { filter { input OOBM-ingress-filter; output OOBM-egress-filter; } address 10.1.1.22/24; } } } } protocols { ospf { area 0.0.0.0 { interface fe-0/0/0.0; interface fe-0/0/1.0; } } }
Configure the management interface as passive for the IGP instance configured for the managed network. Depending on the platform and routing protocol, this may simply require that the interface or its IP address is not included in the IGP configuration.
Lavender hyperlinks in small type off to the right (of CSS
class id
, if you view the page source) point to
globally unique URIs for each document and item. Copy the
link location and paste anywhere you need to talk
unambiguously about these things.
You can obtain data about documents and items in other
formats. Simply provide an HTTP header Accept:
text/turtle
or
Accept: application/rdf+xml
.
Powered by sagemincer